CONTACT US

Our Address

Science Avenue, High-tech Zone, Zhengzhou City, Henan Province, China

  • How To Calculate Number Of Bricks, Cement And Sand For ...

    The size of the modular brick is 190 X 90 X 90 (refer the picture) Mortar Thickness is 10mm; Assume required brickwork volume is 1 cubic metre (m 3) Any brick walls consist of bricks and cement mortar. So, first of all, we are going to find the volume of bricks with mortar thickness and then volume of bricks

  • CONSUMPTION OF CEMENT, SAND, AGGREGATE, - Super Civil CD

    36 行  total cement consumption in bags: total sand consumption in m3: total aggregate

  • ITEMUNITPCC M 5 GradecumPCC M 7.5 GradecumPCC M 10 GradecumRCC M 15 Gradecum查看supercivilcd的所有36行
  • What is the ratio of sand cement water in brick ...

    In brick construction we use the 1:6 cement sand ratio -that means 1 cement bag should be mixed with with 6 bags of sands and the water cement ratio is normally taken as the half of cement. For example their 1 bags of cement. 1 bag contain 50 kg c...

  • How much cement, sand and water is required for 12mm thick ...

    Cement = 50 kgs , Sand = 230 kgs and Water = 56 kgs. Total weight of the mixture = 50+230+56 kgs = 336 kgs. Density of Cement sand mortar = 2200 kg/cum (Approximately) So, Amount of plaster mortar (1: 4) yielded with one Bag of cement (50 kgs) = 336/2200 = 0.153 cum

  • Cement Consumption Coefficients for Various Construction ...

    Construction works involving cement as one of the material requires cement consumption coefficients for estimation of quantities and cost of such works. Coefficients of cement consumption works for various construction activities involving cement mortar, concrete etc. are presented in table. S. No. Construction Work Details Coefficient 1 P.C.C. (1:5:10) 2.6 Bags/cu.mt. 2 P.C.C. (1:4:8) 3.4 ...

  • Calculate Quantities of Materials for Concrete -Cement ...

    The water cement ratio required for mixing of concrete is taken as 0.45. Assuming bulk densities of materials per cubic meter, cubic feet and cubic yards as follows: Cement = 1500 kg/m3 = 93.642 lb/ft3 = 2528.332 lb/cubic yards. Sand = 1700 kg/m3 = 105 lb/ft3 = 2865.443 lb/cubic yards. Coarse aggregates = 1650 kg/m3 = 103 lb/ft3 = 2781.166 lb ...

  • How much cement and sand is required for Mortar 1:4? - Quora

    Nov 23, 2019  1:4 mortar is a ratio of cement and sand by volume. Material required depends on how much you want to produce mortar. Around 7.5 bags cement and 36 cubic ft / 1.04cum sand required per 1 cubic metr of mortar . Water required per bag of cement is 2...

  • How to calculate water in the 1:5 cement-sand ratioSep 02, 2018How to calculate for cement and sand quantity in 1:3 ...Oct 03, 2017What is the amount of cement for a ratio of 1:4 mortar in ...Nov 30, 2016How do we do rate analysis of cement mortar? 查看更多结果
  • Cement Mortar Estimation of Cement, Sand Water in ...

    Mixing of Cement-Sand Mortar (Source: YouTube/ SkillTrain) Estimation of Water, Cement Sand quantity for Cement Mortar. Let us assume a standard quantity of 1m 3 Cement mortar and a mix proportion of CM 1:6 (1 part Cement 6 parts Sand). The quantity can calculated in two ways, one is by weight and the other by volume.

  • Calculation of Cement and Sand for Plastering Excel Sheet

    Jun 27, 2020  Quantity of Water: For general cement-plaster work with 1 : 3 proportion the quantity of water required is about 70 percent by weight of cement. A) The nature and condition of the fine aggregate; b) The temperature and humidity at the time of working; c) Richness of the mix, namely, whether rich or leaner than 1 : 3;

  • Collection of Design Excel SheetsJun 27, 2020Collection Of Civil Engineering Design SpreadsheetJun 27, 2020Calculation of Brick Masonry Estimating Quantity Excel SheetJun 25, 2020Earthwork Calculation SpreadsheetJun 13, 2020查看更多结果
  • How to Find Plastering quantity? Cement, Sand, Water Qty.

    May 01, 2020  The ratios mentioned in plastering are volumetric ratios of Cement Sand (Ex. Cement:Sand = 1:5, 1 part of cement and 5 parts of sand in a mortar). The overall thickness of plastering should be minimum 20mm including two coats. Cement has a dry density volume of 1440Kg/m 3; Each bag of cement weighs = 50 Kgs or 110 lbs

  • Concrete Mix Ratios - Cement, Sand, Aggregate and Water

    Concrete mix ratio of 1:3:3 – On mixing 1 part cement, 3 parts sand with 3 parts aggregate produces concrete with a compressive strength of 3000 psi.. On mixing water with the three ingredients, a paste is formed that binds them together till the concrete mix gets hardened.The strength concrete is inversely proportional to the water/cement ratio.

  • How to Find Plastering quantity? Cement, Sand, Water Qty.

    May 01, 2020  The ratios mentioned in plastering are volumetric ratios of Cement Sand (Ex. Cement:Sand = 1:5, 1 part of cement and 5 parts of sand in a mortar). The overall thickness of plastering should be minimum 20mm including two coats. Cement has a dry density volume of 1440Kg/m 3; Each bag of cement weighs = 50 Kgs or 110 lbs

  • cement consumption in PCC 1:3:6 and M10 - Civil Sir

    water cement ratio for m10 grade of concrete. Ratio of water and cement is known as water cement ratio which is about 34 litre per bag cement for m10 grade of concrete. 1 bag cement required = 34 litre of water. 66.5 bags = 66.5×34= 2261 litre of water. So we have required water consumption in pcc 1:3:6 is approx 2261 litre of water for 100m2 ...

  • formula for cement and sand consumption brick work in 1 5

    Brick Work:: 57 Table 9.2: Consumption of Cement and Sand per Cubic meter of Brick work Table 9.3: Consumption of Cement in 115 mm thick Brick Work (BW) per sq. m. 9.4 METHOD OF MAKING MORTAR FOR BRICKWORK (B/W) For example, to make a mortar of ratio 1 : 4 take 4 volumes of sand

  • How to calculate cement, sand and coarse aggregate for ...

    Sand Volume – 0.423 m 3. Coarse Aggregate – 0.845 m 3. Water Cement Ratio Calculation. From the IS Code standard, Assuming the water-cement ratio for M20 is 0.55. Therefore required water quantity = Cement Volume X WC Ratio = 0.282 X 0.55 = 0.1551 m 3 Unit weight of water = 1000 Litres / m 3 Water Quantity in Litres = 155.1 Litres

  • How To Calculate Number Of Bricks, Cement And Sand For ...

    Sep 26, 2018  REQUIRED OF MORTAR IN BRICK WORK (Plaster Calculation) Now we Calculate Mortar quantity of cement and sand Ratio is 1:6. Mortar quantity is 0.2305 (Wet Condition) we calculate Dry Value Dry Mortar Value is = 0.2305 x 1.33 = 0.306565 m3. Cement Calculation. Volume = Volume of Mortar x (Ratio of Cement/ Sum of ratio) Volume = 0.306565x (1/7) = 0.0438

  • Calculation of Cement and Sand for Plastering Excel Sheet

    Jun 27, 2020  Quantity of Water: For general cement-plaster work with 1 : 3 proportion the quantity of water required is about 70 percent by weight of cement. A) The nature and condition of the fine aggregate; b) The temperature and humidity at the time of working; c) Richness of the mix, namely, whether rich or leaner than 1 : 3;

  • How to Calculate Cement, Sand and Coarse Aggregate ...

    Coarse Aggregate = (Coarse Aggregate Part / Concrete Parts ) * Concrete Volume = (3/5.5) * 2 = 1.09 m 3 . Water Cement Ratio. According to IS 10262 (2009), Assuming Water-Cement Ratio for the Concrete as 0.45. Required Amount of Water = W/C Ratio X Cement Volume

  • Concrete Mix Design Different Grades of Concrete

    May 17, 2017  We generally maintain 0.35-0.50 of water cement ratio. Remember, above values may change according to the moisture content present in sand and aggregate. Cement Required for 1m 3 of Concrete = 400Kgs Assume W/C ratio = 0.50 (50% of cement) Water required for 1m 3 of Concrete

  • Concrete blocks - sand - cement blocks

    Concrete blocks - sand - cement blocks. Contents - Previous - Next. It is faster to build with concrete blocks than with bricks and the amount of mortar is reduced to less than half. If face shell bedding is used, in which the mortar is placed only along the edges of the blocks, the consumption of mortar is reduced by a further 50%.

  • PREFACE - SHIVA CEMENT

    2 For maximum size of coarse aggregates as 20mm, sand should be two-thirds of the coarse aggregate. 3 For maximum size of coarse aggregates as 16mm, sand and coarse aggregate should be in equal parts. 4 In general, a slightly over-sanded mix helps to obtain a dense and water tight concrete.

  • Concrete produced using crushed bricks as aggregate

    Estimates for the natural aggregate consumption ... Sand 5-10 10-25 Brick A Brick B ... and 30 % of the total weight of coarse aggregates. Additionally, two water/cement ratios, 0.45 and 0.5 by weight, were used that leaded to very different concrete workability. The amount of

  • Unit weight of brick? Sand? Aggregate? Steel? Cement? Water?

    Answer / vansh. Brick = 1900-2100kg/m3 Sand = 1600kg/m3 Cement = 1440kg/m3 Water = 997kg/m3 Aggregates = 1520-1680kg/m3

  • Aggregates - Portland Cement Association

    Aggregates are inert granular materials such as sand, gravel, or crushed stone that, along with water and portland cement, are an essential ingredient in concrete. For a good concrete mix, aggregates need to be clean, hard, strong particles free of absorbed chemicals or coatings of clay and other fine materials that could cause the ...

  • formula for cement and sand consumption brick work in 1 5

    Brick Work:: 57 Table 9.2: Consumption of Cement and Sand per Cubic meter of Brick work Table 9.3: Consumption of Cement in 115 mm thick Brick Work (BW) per sq. m. 9.4 METHOD OF MAKING MORTAR FOR BRICKWORK (B/W) For example, to make a mortar of ratio 1 : 4 take 4 volumes of sand

  • cement consumption in PCC 1:3:6 and M10 - Civil Sir

    water cement ratio for m10 grade of concrete. Ratio of water and cement is known as water cement ratio which is about 34 litre per bag cement for m10 grade of concrete. 1 bag cement required = 34 litre of water. 66.5 bags = 66.5×34= 2261 litre of water. So we have required water consumption in pcc 1:3:6 is approx 2261 litre of water for 100m2 ...

  • Unit weight of brick? Sand? Aggregate? Steel? Cement? Water?

    Answer / vansh. Brick = 1900-2100kg/m3 Sand = 1600kg/m3 Cement = 1440kg/m3 Water = 997kg/m3 Aggregates = 1520-1680kg/m3

  • Unit weight of brick? Sand? Aggregate? Steel? Cement? Water?

    Answer / navin kumar mandal. 1 Cement-1440 2 Steel-7850 3 Sand- *Dry-1600 *River-1840 4 Stone(basalt)-1450 to 1550 5 Water-1000 6 PCC-2240 7 RCC 2% Steel- 2420 8 Bricks- 1600 to 1920

  • How to calculate cement, sand and coarse aggregate for ...

    Sand Volume – 0.423 m 3. Coarse Aggregate – 0.845 m 3. Water Cement Ratio Calculation. From the IS Code standard, Assuming the water-cement ratio for M20 is 0.55. Therefore required water quantity = Cement Volume X WC Ratio = 0.282 X 0.55 = 0.1551 m 3 Unit weight of water = 1000 Litres / m 3 Water Quantity in Litres = 155.1 Litres

  • Concrete produced using crushed bricks as aggregate

    Estimates for the natural aggregate consumption ... Sand 5-10 10-25 Brick A Brick B ... and 30 % of the total weight of coarse aggregates. Additionally, two water/cement ratios, 0.45 and 0.5 by weight, were used that leaded to very different concrete workability. The amount of

  • Sand Cement Brick Containing Recycled Concrete Aggregate ...

    The aim of this study is to determine the physical and mechanical properties of sand cement brick containing recycled concrete aggregate and to determine the optimum mix ratio containing recycled ...

  • How to Calculate Number of Bricks and Cement, Sand for ...

    Volume of bricks with mortar in 1 Cum = 500 x 0.002 = 1 m 3. Volume of bricks without mortar in 1 Cum = 500 x 0.001539 = 0. 7695 m 3. Therefore required cement mortar = 1 cum – 0.7695 cum = 0.2305 m 3. Step 5 – Calculate Cement Sand Volume. As we know the required cement mortar = 0.2305 m 3. Assuming cement mortar ratio as 1:5 (1 Part ...

  • PREFACE - SHIVA CEMENT

    2 For maximum size of coarse aggregates as 20mm, sand should be two-thirds of the coarse aggregate. 3 For maximum size of coarse aggregates as 16mm, sand and coarse aggregate should be in equal parts. 4 In general, a slightly over-sanded mix helps to obtain a dense and water tight concrete.

  • How To Calculate Cement, Sand Quantity For Plastering

    Volume of cement mortar required = ( Plastering Area x thickness ) = 100 m 2 x 0.012m = 1.2 m 3 (This is wet volume of cement mortar (after mixing water) but we need dry volume. To get dry volume consider 35% bulking of sand and 20% wastages = 1.2 m 3 x (1+0.2+0.35) (Rather than 35% sand bulkage and 20% wastage you can add 1.54 as constant) = 1 ...

  • Concrete making materials Cement Aggregate and Water

    Oct 28, 2017  The aggregate should be hard, strong, durable and well graded to form a compact and dense mass of concrete. More about aggregate can be read from any book on “Concrete Technology”. (3) Water. Water is required for chemical reaction of cement and also for providing workability to concrete. The water used for mixing and curing of concrete ...

  • Sand: most widely consumed natural resource after fresh water.

    Sand has by now become the most widely consumed natural resource on the planet after fresh water. [1] The annual world consumption of sand is estimated to be 15 billion tons, with a respective trade volume of 70 billion dollars. Over the last two centuries sand has

  • What is the ratio of sand to cement for mortar? AnswersDrive

    A concrete mixture ratio of 1 part cement, 3 parts sand, and 3 parts aggregate will produce a concrete mix of approximately 3000 psi. Mixing water with the cement, sand, and stone will form a paste that will bind the materials together until the mix hardens.

  • sand and aggregate consumption in civil

    Following is a simple method used by engineers to calculate cement, sand and aggregate to produce different grade of concrete like M5, M7.5, M10, M15 and M20. if you don't want to learn the math involved in the design, you can use the table given at the end of the article to produce different grade of concrete.

  • Sand Cement Brick Containing Recycled Concrete Aggregate ...

    The aim of this study is to determine the physical and mechanical properties of sand cement brick containing recycled concrete aggregate and to determine the optimum mix ratio containing recycled ...

  • sand and aggregate consumption in civil

    Following is a simple method used by engineers to calculate cement, sand and aggregate to produce different grade of concrete like M5, M7.5, M10, M15 and M20. if you don't want to learn the math involved in the design, you can use the table given at the end of the article to produce different grade of concrete.

  • PREFACE - SHIVA CEMENT

    2 For maximum size of coarse aggregates as 20mm, sand should be two-thirds of the coarse aggregate. 3 For maximum size of coarse aggregates as 16mm, sand and coarse aggregate should be in equal parts. 4 In general, a slightly over-sanded mix helps to obtain a dense and water tight concrete.

  • What is the ratio of sand to cement for mortar? AnswersDrive

    A concrete mixture ratio of 1 part cement, 3 parts sand, and 3 parts aggregate will produce a concrete mix of approximately 3000 psi. Mixing water with the cement, sand, and stone will form a paste that will bind the materials together until the mix hardens.

  • Calculate the Quantity of Cement, Sand Aggregate In ...

    Jan 21, 2018  of bricks in meter cube, calculation of cement sand in plaster, calculation of cement sand and aggregate in concrete, ssc je notes, one bag of cement equal to how many cubic foot feet, calculation ...

  • 作者: parag pal
  • Demand for Frac Sand and Concrete Drives Scarcity

    Like any commodity, sand requires uniformity. Uniform sand, or "aggregate," includes gravel, crushed stone and a number of recycled materials, such as crushed concrete, each of which has unique ...

  • Concrete making materials Cement Aggregate and Water

    Oct 28, 2017  The aggregate should be hard, strong, durable and well graded to form a compact and dense mass of concrete. More about aggregate can be read from any book on “Concrete Technology”. (3) Water. Water is required for chemical reaction of cement and also for providing workability to concrete. The water used for mixing and curing of concrete ...

  • Changes sweeping the brick industry • Aggregate Research ...

    Bricks produced in a conventional kiln by mixing fly ash with clay are certainly better in strength, size and have least water absorption property. The IS code for these bricks is IS – 13757. Fly ash lime bricks don’t use clay but lime, sand and fly ash. These are not burnt. These are also called FAL G bricks.

  • Use of sea sand as fine aggregate in concrete making

    Concrete is a mixture of cement, coarse aggregates, fine aggregates or sand and water. The approximate ratios of these components are as below: Based on the ratios and the anticipated cement consumption in the country, the expected requirement of sand will be about 500-550Mt in

  • Does anyone know the annual consumption of concrete in the ...

    The consumption of water is approx 120 tonne per person per year. ... Ex. 1:1.5:3 is the ration of M20 and now how much sand or cement or aggregate we use in this? View.

  • Concrete Calculator - Estimate Cement, Sand, Gravel ...

    Example calculation Estimate the quantity of cement, sand and stone aggregate required for 1 cubic meter of 1:2:4 concrete mix. Ans. Materials required are 7 nos. of 50 kg bag of cement, 0.42 m 3 of sand and 0.83 m 3 of stone aggregate.

  • Sustainability of Concrete Using Copper Slag as ...

    Concrete consumption is so extensive that it stands second to water. Spiraling urbanization has led to excessive consumption of concrete, which has increased the demand for sand, cement and coarse aggregates. The sand consumption across the world per

  • Cement and Sand ratio for brickwork. How to Calculate ...

    Thereby, lots of cement consumption for brickwork is required. Depending on the quality of bricks, the brickwork is classified into three categories. First Class Brickwork, it is perfect for load bearing walls as the minimum crushing strength of the bricks used is 105 Kg per sq The cement sand ratio for brick masonry is 1:3 to 1:6.

  • Can portland cement be mixed without sand or gravel ...

    Even small aggregate, sand and pea gravel, will make a significant difference in the strength. Aggregate to cement proportions should be about 3 parts aggregate to 1 part cement by volume for field/hand mixed concrete. Only enough water should be added to afford workability and eliminate voids in the mix. The less water you use, the higher the ...